Modelling wax for professional, three-dimensional wound effects.
FX effect wax is a wax product for the design of small 3D effects. FX wax can be easily applied and allows very fine transitions, almost invisible. The transparency of the material gives the created effect a natural appearance. Its good adhesion makes the use of adhesive unnecessary, thus being also very pleasant for the model. Use an ontological spatula to apply the desired amount of Wax over the desired skin area. Model and then apply makeup. The product can be easily removed with skin cleaner.
Modeling wax for professional 3D wound effects.
Its properties also allow professional use for film and TV.
Due to its transparency in combination with a slight skin tone coloring, extremely realistic effects can be achieved.
Simply apply in the desired layer thickness to the corresponding skin area and let the edges fade out softly.
Special effects, such as scars, bumps, etc. can be well modeled out with a spatula.
If the wax is too firm, simply heat it slightly. In this way, the desired toughness can be adjusted well.
The wax can be easily removed and any residue on the skin and tools can be easily dissolved with special adhesive remover.